New products of National IV Standards: The brand-new heavy-duty pavers BF880C-3 and BF980C-3 from BOMAG

Super powerful power system

The new models of BOMag pavers include two types: BF880C-3 and BF980C-3. Both of these pavers are equipped with the original imported Deutz TCD6.1L06 engine, which meets the National IV emission standards and has a rated power of 140/160 kilowatts. The rated power of the BMW BF880C-3 and BF980C-3 pavers not only ensures sufficient power but also stands out in fuel economy among engines of the same grade. These two types of pavers can be matched with two specifications of screeds, S500 and S600, with a maximum spreading width of up to 10 meters and a maximum spreading thickness of up to 35 centimeters.

Low emissions, low noise, and more environmentally friendly

Both of these pavers are equipped with the BMG fuel-saving economy mode (ECOMODE) as standard. It can intelligently adjust the power distribution of each system according to the actual load of the machine. While working efficiently, it has low fuel consumption, low noise, reduced carbon dioxide emissions, and can also extend the service life of the rotating parts of the engine and hydraulic pump set. 80% of the construction work of the paver can be completed under ECOMODE. While achieving energy conservation and emission reduction, users will also enjoy more benefits.

BMW Grille

The shortest heating time

The most perfect protection: The heating strip is cast into a single aluminum plate

The temperature of the screed is of vital importance in asphalt paving construction. The unique MAGMALIFE screed electric heating system of Magmalife has all the heating strips cast into a single aluminum plate. By taking advantage of the best thermal conductivity of metal, it significantly shortens the heating time and ensures uniform temperature distribution, allowing the paver to be quickly put into operation. Picture

The most convenient way to assemble an ironing board

Quick assembly crochet set

The unique quick assembly joint for ironing plates of BOMAG can quickly, simply and perfectly complete the assembly of the extended section of the ironing plate. It is highly efficient in practical use. The ironing plate extension piece can be assembled simply and quickly. The assembly time of the ironing plate has been greatly shortened: two operators can complete the assembly simply and quickly in just 1.5 hours, significantly reducing the construction cost. Picture

Ironing plate load control system

Load control system of the ironing plate (L.C.S)

Both of these pavers are equipped with a standard screed load control system (L.C.S.), which can automatically control the load of the screed. When starting, it increases the traction force. Through the control of the paver operator, during the operation intervals, the screed pressure can be automatically released or locked. It can be precisely adjusted according to the properties of different materials, perfectly achieving anti-settlement, stop and start delay pressure control. Help operators deal with working conditions such as thin-layer paving.

Excellent maintenance and repair performance

The maintenance cabin door with a large opening degree facilitates access to all maintenance components

The maintenance of the BMW paver is as simple as its operation. The engine compartment and hydraulic components can be conveniently accessed from both sides of the machine. All filters are centrally arranged on one side of the machine, and all maintenance points are within easy reach. There are also some good designs that simplify maintenance work, such as the automatic central lubrication system, which extends the maintenance intervals and minimizes the downtime for maintenance as much as possible.

The entire vehicle wiring harness assemblies of these two pavers all adopt the industry's highest standard of aviation-grade wiring harness protection, which is oil-resistant, wear-resistant and heat-resistant, further reducing the long-term usage cost of the equipment.

Other highlights

Key components do not compromise on cost!

The hydraulic systems of these two pavers both adopt imported brands. The key systems such as vibration, hammers and material distribution are designed with plunger pumps, which are highly reliable and have a long service life. Both pavers are equipped with hydraulic cylinder-controlled track tensioning wheels as standard, which increases the convenience for users.

Feeding and distribution system

Both pavers are equipped with an independently controlled, reversible double scraper design as standard, which can quickly solve the problem of material jamming in the spacious material conveying space. The screw conveyor can be independently controlled and driven on both sides. It is standard equipped with a reverse rotation function and can be optionally equipped with a hydraulic auger for lifting.

Intuitive operation interface

All operating components are clearly visible at a glance

The Bomag paver is easy to operate, and all the button functions are clearly visible at a glance. With just a brief introduction to the machine's functions, the driver can operate it. Meanwhile, each switch on the operation panel independently controls a function, and each switch can be replaced separately, significantly reducing the equipment maintenance cost.