Maintenance
Analysis of Common Faults of Gear Pumps for Compaction Garbage Trucks
1. Reasons for the oil pump not discharging oil or insufficient flow
The pump doesn't rotate.
The oil suction pipe or oil suction filter is clogged
The amount of hydraulic oil is too low
The internal components of the pump are worn or damaged
The seal is damaged.
Exclusion method
The spline of the pump is damaged or the power take-off cannot be engaged
Analyze, inspect and repair, and clear blockages
Add hydraulic oil to the specified height
Replace or repair replacement
2. Reasons for high noise and large pressure fluctuations
The oil suction pipe or oil suction filter is clogged
There is a large amount of air in the oil circuit
The internal components of the pump are worn or damaged
The oil is contaminated or emulsified
Exclusion method
Analyze, inspect and repair, and clear blockages
Exhaust
Replace or repair
Change the hydraulic oil
3. Causes of abnormal fever
There is a large amount of air in the oil circuit
The amount of hydraulic oil is too low
System blockage
Exclusion method
Exhaust
Pressurize the oil to the specified height
Analyze, inspect and repair, and clear blockages
Related articles
- How to troubleshoot the faults of the brake caliper of a loader
- Common Faults and Elimination methods of impact crushers
- Fault Analysis and Elimination of TY220 Bulldozer Not Turning
- Analyze the common faults of the gas control valve of the W4-60C excavator
- Analysis and Treatment of the Causes of Easy fracture of Engine Crankshafts
- Fault Analysis and Elimination Methods for the Hydraulic Transmission System of Loaders
- The "observation, olfaction, touch, smell and palpation" analysis method for loader faults
- Analysis of Cost Control Measures for Road and Bridge Engineering Construction Projects
- Troubleshooting of faults such as overheating of the torque converter in bulldozers and lack of powe
- Wear Analysis of the Traveling Mechanism of Crawler Bulldozers and Countermeasures to Extend its Ser