Maintenance
After driving a pump truck for so many years, have you added the diesel engine oil correctly?
1.Insufficient engine oil can easily cause cylinder pulling, and in severe cases, it may even damage the cylinder block.
2. Excessive engine oil will affect the power of the machinery. If you do a hand-swinging motion on the ground, it will definitely not be strenuous. However, if you do it in water, it will be much more strenuous than on the ground.
3. Excessive engine oil can also easily lead to oil leakage and oil burning. Therefore, when adding engine oil, it is necessary to follow the standard and add a certain type of oil that is suitable for the model and driving environment. It is absolutely forbidden to do so. This will help you reduce unnecessary losses.
4. Adding too much engine oil can cause damage to the engine. The pressure increases, which can damage the crankshaft oil seal, resulting in oil leakage, black smoke, high temperature, and when the oil enters the cylinder and burns, it generates black gummy substances, which can also damage the cylinder.
Whether too much or too little engine oil is added, it will have an impact on the machinery. Therefore, when refueling the machinery in daily life, it should be done strictly in accordance with the prescribed standards to reduce the occurrence of mechanical failures.
- Pre
What are the precautions for the construction of motor graders?
Construction PrecautionsFor ground with significant undulati...
- Next
Everyone should pay attention to the causes of hydraulic oil contamination in construction machinery
Contaminants in the new oilAlthough hydraulic oil is refined...
Related articles
- Discussion on Two Technical Issues of After-sales Service for Construction Machinery
- What are the applications of automatic reciprocating cylinders in hydraulic high-pressure pumps?
- How to solve the problem of high vacuum degree in the suction pipe of the main pump of the WY20 exca
- Faults and Troubleshooting Methods of Chutian IPF85E Concrete Pump Truck
- Assembly requirements for forklift gear oil pumps
- Repair of the main parts of the forklift gear pump
- Maintenance and assembly of fuel injection pumps and governors for truck cranes
- Troubleshooting of the "seizing" fault between the pump plunger and the cylinder block of
- Analysis of the Causes of Pipe Blockage Faults in Concrete Pump Trucks
- Analysis of the Causes of the failure of Concrete Pump trucks to pump