Maintenance
-
Tips for excavators to climb and descend slopes
Please be careful when climbing the slopeObserve the Angle of the slope to see i
-
Why does Japan maintain its excavators so well? The answer is....
In developed countries, cars are not treated as cars and construction machinery
-
How to check the wear degree of the bearings of each wheel of a motor grader?
When checking the front wheels, support them with a scraper, get out of the car,
-
Very important! Detailed rules for the use and maintenance of road rollers
Rollers are mainly used for compacting soil layers and other construction operat
-
Seven common misunderstandings in the maintenance and repair of road rollers: Everyone must pay atte
1. Heat the piston with an open flameWhen the piston is directly heated by an op
-
Never do these things when starting the excavator engine!
Do not start without coolant or with boiling water addedIf coolant is added afte
-
Proper maintenance of the "filter element" of construction machinery's lungs
Common problems with engine oil and fuel filters:Under what special circumstance
-
How should a road roller be maintained after being parked for a long time?
1. Perform technical maintenance for long-term parking as required by the engine
-
What should a good loader driver possess?
Turning the steering wheel feels like turning a tire with your own handsThe whee
-
Adding too much engine oil can cause many harms! Is this true?
Insufficient engine oil can easily cause cylinder pulling, and in severe cases,
-
In advance, loader drivers must pay attention to these equipment inspection items
Before changing the oil, drive the motor grader for about 10 kilometers to ensur
-
Safety operation norms for loaders, everyone should pay attention!
1. Inspect the technical conditions of all parts of the vehicle in accordance wi
-
How to change the transmission oil of a motor grader? You'll understand after reading this!
Before changing the oil, drive the motor grader for about 10 kilometers to ensur
-
You must know the maintenance knowledge of loader tires!
Regarding the handling, maintenance and storage of loader tires, if the tires an
-
Five major maintenance tips for construction machinery
1. EngineEngine oil and oil filter elements must be genuine parts and replaced a